Honeywell Limitless WDRR Series Quick Start Manual page 11

Limitless™ WDRR Series 50063986
Issue 2,
1.8 WDRR Mounting
The WDRR is intended to be mounted to a DIN-Rail or mounted via the four (4) mounting tabs.
DIN Rail mounting: The WDRR Receiver is supplied with two snap in DIN-Rail tabs that will need to be inserted
into the back of the WDRR housing as shown below.
Figure 7. Limitless™ WDRR Mounting Clips
Tab mounting: The WDRR has four tabs that are intended to allow mounting with a #6 style screw. As there are
many types of screw fasteners, care should be taken to not overtighten the fastener and cause the mounting
tab/housing to crack or fracture. Also, ensure that the housing is being mounted on a flat surface.
Figure 8. Limitless™ WDRR Mounting Tabs
Honeywell Sensing and Control 11