Turning The Handset On/Off; Turning The Handset Off; Turning The Handset On; Setting The Ring Volume Level On The Handset - Topcom BUTLER 1200C User Manual

HANDL. B1200C/1210C
Butler 1200C/1210C
• Press the Programming key

4.16 Turning the handset on/off

4.16.1 Turning the handset off

The handset is turned on.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
numbers, nor receive any calls.
Note : If you would like to leave the menu without turning off the handset, press the Delete/Mute key

4.16.2 Turning the handset on

The handset is turned off.
• Press the Programming key

4.17 Setting the ring volume level on the handset

If you want, you can change the ring volume of an incoming call. You have 10 levels. You can
set the ring volume of internal and external calls separately so you can hear a difference.
If you select level '0', the symbol
ring when an external call is received (you still hear it ring for internal calls).
Level '9' is the highest level. The telephone is set to level '5' by default.

4.17.1 Setting the ring volume for external calls (0-9)

• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'OUTSIDE' appears on the display.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number keypad
to do this.
• Press the Programming key

4.17.2 Setting the ringer volume for internal calls (1-9)

• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'EXTERNAL' appears on the display.
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
30-03-2001 08:32
to confirm that you want to delete it.
.
a few times until 'POWER OFF' appears on the display.
. The telephone turns itself off. You cannot dial any more
. The telephone turns itself on.
appears on the display and you no longer hear the phone
.
repeatedly until 'RING SEL' appears on the display.
.
.
repeatedly until 'VOLUME' appears on the display.
.
to confirm your selection.
.
repeatedly until 'RING SEL' appears on the display.
.
repeatedly until 'INTERNAL' appears on the display.
.
repeatedly until 'VOLUME' appears on the display.
.
57
Page 57
.