The Connection Panel - Topcom WBR 7011 B Quick Installation Manual

1 THE CONNECTION PANEL

1Z VDC
* POWER 12V DC: The power port is to connect the 12 V DC
(1000mA) power adapter.
--> The power LED on the front panel will go ON when the power
adapter is connected.
* WAN: The WAN Ethernet port is to connect your ASDL/Cable
modem.
--> The WAN LED will go ON if the network Ethernet cable is
properly connected.
* Ports 1- 4: This is to connect networked devices, such as PCs, ftp
servers or anything else you want to put on your network.
--> The LAN LED's will indicate the connection status.
* Reset Button: If you would like to load default settings, press the
reset button and hold it for at least 4 seconds. It will load the factory
default settings for the device. Do not press the reset button unless
you want to clear the current data.
Topcom Wireless Broadband Router WBR 7011b
Topcom Wireless Broadband Router WBR 7011b
4 3 2 1
WAN Reset
3