TrekStor PrimeTab S11B Operating Instructions Manual page 25

ADVICE
i
If you do not want the Primetab to automatically connect to the selected
network if available, remove the tick next to "Connect automatically".
g) Click "Connect". The Primetab connects to the selected network.
Depending on how your router is configured, you will be prompted to
authenticate yourself to the network. Generally speaking, a wireless network is
secured through a WPA network key or a WPS authentication method:
WPA
If a WPA network key was assigned for your router, enter it in the input field and
click "Next" to confirm.
WPS
If a WPS authentication method (for example, a PIN) was set up for your router,
the Primetab shows a different input field. Enter the PIN in the input field (or
follow the selected authentication method). The Primetab now connects to the
wireless network.
ADVICE
i
You may be asked whether the Primetab should search for additional devices in the
selected network and whether it should automatically connect to these devices (for
example, printers or television sets). This is recommended in private home networks
that you can trust. If you connect to a public wireless network, we recommend that
you decline this option by tapping "Nein". In this way, you protect your private sphere.
You can now surf the Internet as usual using the Internet browser.
ADVICE
i
To deactivate the WiFi connection, use the tip of your finger to move the slider
for WiFi from right to left. The word "Off" now appears next to the slider.
25