Wireless Setup - Carrier Infinity Series Installation Instructions Manual

SSID of a network, note the name of your network (including case of letters)
A window will open showing all of the wireless networks
available. See Fig. 3.
Encryption type and key will need to be obtained from your
wireless router's administration web page. Please see the
instructions of your router to obtain this.
Note your network information here before installing the WiFi
B- -SAM.
SSID
Encryption Type:
Encryption Key:
1. Mount WiFi B- -SAM and connect ABC wiring and 24VAC
transformer.
2. Power up WiFi B- -SAM and HVAC system and perform in-
stallation procedure from user interface.
Go to Installer Service menus (10 second press of
Advanced) and select INSTALL.
Ensure "REMOTE ACCESS
equipment summary screen (check ABC wiring if not).
3. Go to the WiFi B- -SAM Setup screens by pressing the Ad-
vanced button on the user interface and then pressing the
right side button until the WiFi B- -SAM Setup screens ap-
Fig. 3 - - Wireless Network Connection Window
YES" appears on
2
pear. These screens will not appear if you do not have a - -B
model user interface.
4. Press the right side button to get to WiFi B- -SAM

WIRELESS SETUP 1.

5. Highlight the SSID item and enter your network's SSID (it
is case sensitive).
Press the Temp Up/Down to move the cursor left or right.
Press the Time Up/Down to change the character.
The Space character is obtained by continuously pressing
the Time Down button.
6. If you have encryption, press the right side button to go to
WiFi B- -SAM WIRELESS SETUP 2.
Select the encryption type.
Enter the encryption key.
Press the Temp Up/Down to move the cursor left or
right.
Press the Time Up/Down to change the character.
Encryption type and key will need to be obtained from
your wireless router's administration web page. Please
see the instructions of your router to obtain this.
7. Exit the menus by pressing the Advanced button, saving all
entries.
8. Give the system about 2 minutes to respond to all the
changes.
A08410