Download Print this page

ZALMAN CNPS9500 AM2 User Manual page 6

Advertisement

All manuals and user guides at all-guides.com
10. FAN MATE 2 Installation and Usage
1 1 ) ) Installing FAN MATE 2 inside the System
Control Knob
Fan Connector
(CNPS9500)
Motherboard
Connect the appropriate 3-pin connector on the
cable to the CPU Fan Header and to the
CNPS9500's Fan Connector.
◆ Fan speed is controlled by adjusting the control knob. When the control knob on FAN MATE 2 is
turned fully counter-clockwise, the fan operates in Silent Mode. Turned fully clockwise, it operates in
Normal Mode.
Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd.
is not responsible for any damage to systems or CPUs caused by its use with other types of fans.
11. Notes on Usage
1) Checking CPU Compatibility
Please refer to "Compatible CPUs" on page 2 to confirm that your CPU is compatible before using
the CPU cooler.
2) Cautions During Booting
When booting the computer, it may automatically power down after an alarm sound is set off by a
system monitoring program. This indicates that the CPU fan is rotating slowly. If this happens, turn the
Control Knob fully clockwise to increase the fan speed. Then set 'CPU Fan Detected' to
'Disabled' in BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring
program to less than or equal to 1300rpm.
Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certain rpm.
If the BIOS settings are updated, Silent Mode can be used. For more information on updating your
BIOS, please refer to the motherboard manufacturer's website. Disabling CPU fan speed detection
in BIOS settings does not affect computing performance.
3) OVERCLOCKING
Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.
The specifications of any product may change without prior notice to improve performance.
2 2 ) ) Installing FAN MATE 2 outside the System
CPU Fan Header
Pull the 6-pin Connector out of the system and
connect it to FAN MATE 2, which can be
attached to the case with the Double-Sided Tape.
Double - sided Tape
FAN MATE 2
6-Pin Connector
5

Advertisement

loading