Bose Bluetooth Audio adapter Owner's Manual page 3

Information about products that generate electrical noise
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harm ful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate this
equipment.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete
declaration of conformity can be found at : www.Bose.com/compliance
This symbol means the product must not be discarded as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human
health and the environment. For more information on disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you bought this product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
CAN ICES-3 (B) / NMB-3 (B)
This (These) device(s) comply with FCC and Industry Canada RF radiation exposure limits set forth for general
population.
It (They) must not be co-located or be operating in conjunction with any other antennas or transmitters.
Tested temperature range: 32º F to 113º F (0º C to 45º C).
Names and Contents of Toxic or Hazardous Substances or Elements
Lead
Part Name (Pb)
PCBs X
Metal parts X
Plastic parts O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in
SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit
requirement in SJ/T 11363-2006.
Toxic or Hazardous Substances and Elements
Mercury Cadmium
(Hg) (Cd) Hexavalent (CR(VI))
O O
O O
O O
Important Safety Information
Polybrominated Biphenyl
O
O
O
Polybrominated
(PBB)
O
O
O
diphenylether
(PBDE)
O
O
O
English - 3