Table of Contents
Advertisement
9. AIR BOX INSTALLATION
A. Remove the two return air grills and filters which are
shipped loose in the air box. (FIG. 9.A)
REMOVE GRILLS
FIG. 9.A.
B. Slide the front end of the air box over the shafts of the
thermostats and selector switch. (FIG. 9.B)
FIG. 9.B
C.
Install the four screws through legs in air box into the
prepunched holes in the ceiling template. NOTE:
There are three optional mounting holes for which no
screws are provided. (FIG. 9.C)
D.
Install the return air grills and filters by simply pushing
them into place. (FIG. 9.D)
E.
Install the two knobs provided on the ends of the
thermostat and selector switch shafts.
F.
The power supply to the air conditioner may now be
turned ON.
CEILING TEMPLATE
I
AIR BOX
10
G. Your air conditioner is now installed and ready for
operation. Please read the following instructions be-
fore attempting to run the unit.
10. OPERATING INSTRUCTIONS
A. CONTROLS
1. The thermostat has a temperature range of 18.5"C
in Cool (0) position to 325°C in Warm (a)
position.
The thermostat controls the unit
compressor ON and OFF cycle in the cooling
mode and the electric heater ON and OFF cycle in
the heating mode.
The selector switch controls the unit fan speeds,
and the heating, cooling and fan modes of opera-
tion.
FIG. 10.A.2
FIG. . 1 0.A.1
Hide quick links:
Advertisement
Table of Contents
