Canon Laser Shot LBP-950 User Manual page 6

● Thick paper
You can use thick paper of 100-297 mm width, 190.5-432 mm length and 106-128 g/m
weight with this printer. This includes A5-, B4-, A3-, Letter-, Legal- and Ledger-size paper.
Thick paper should be loaded into the paper tray.
● Label sheet
A4-size label sheet can be used in this printer.
Do not use the following types of label sheet. If a sheet type that does not
conform to specifications is used, paper jams that are hard to remove may
occur or printer malfunctions may be caused.
• Sheet with labels that are likely to peel off, or sheet on which part of the
labels have been used.
• Coated sheet that can easily peel off from the backing sheet.
• Label sheet with some adhesive surfaces exposed.
● Transparencies
A4-size transparencies can be used in this printer.
• Since transparencies are likely to be difficult to separate, use them after
fanning them one sheet at a time.
• When outputting transparencies face up, remove each transparency from
the tray as it is output. If you leave the transparencies on the tray, they will
roll up, and a paper jam will occur.
2
5