Positioner
With LCD and autotune, F
IECEx
Ex nA IIC T6...T4 Gc; Ex tc IIIC T80°C Dc
EAC Ex 1Ex ia IIC T6; Ex tb IIIC T80°C Db X, IP66
EAC Ex 2Ex nA ic IIC T6/T5/T4 Gc X; Ex tc IIIC T80°C Db X, IP66
2.3 Firmware versions
Firmware revisions (Control R)
R 1.44 to 1.46
Internal revisions
R 1.52
•
Diagnostics: all EXPERTplus diagnostic functions are available without having to activate them in
the positioner (u EB 8389 on EXPERTplus Valve Diagnostics).
•
Additional function blocks: 2x DO (Discrete Output), 1x IS (Input Selector), 1x MAI (Multiple
Analog Input), 1x MAO (Multiple Analog Output). See Configuration Manual u KH 8384-5
•
New functions: new functions are implemented in the DO Function Block (Discrete Output). See
Configuration Manual u KH 8384-5
•
Action on fault detection: If the AO Transducer Block is in O/S mode and the condensed state
changes to "Maintenance alarm", the following actions can be started:
• Hold last value
• Move valve to fail-safe position
• Move to a predefined fault state value
Configuration Manual
R 1.54 to 1.56
Code 48 extended: The following subitems have been added to Code 48 (u EB 8389):
• h0: Activation/deactivation reference test
• h1: Reference test completed (YES/No)
• h3: Automatic reset of diagnosis after this time
• h4: Remaining time until diagnosis reset
R 1.54 to 1.56
Internal revisions
R 1.57
Data logging: Data logging has been extended to document errors in internal device communication.
R 1.62
The positioner moves more quickly to closed-loop operation due to an improved start-up routine.
EB 8384-5 EN
™ fieldbus
OUNDATION
KH 8384-5
u
Markings on the device
Type 3730-5 x x x 0 x x x x 0 x 0 0 x 0 x x
8
1
8
0 1 5
0 1 4
0 2 0
15