INSTALLATION – SOLAR COLLECTORS
Note: Although the drawings illustrate the solar cold pipe connecting the bottom
left hand corner of the solar collector array, the solar cold pipe may be connected
to either the bottom right or the bottom left hand corner. The solar hot pipe must
connect to the top of the solar collector array diagonally opposite to the solar cold
pipe connection.
INSTALLATION WITH SCREWED FITTING SOLAR COLLECTORS
SUPPLIED IN COLLECTOR KIT (299139)
SUPPLIED IN COLLECTOR KIT (SCREWED FITTINGS) (299139)
1.
Collector angle
2.
Collector strap
3.
Collector union
4.
Sensor connector
5.
End plug
'O' ring
6.
7.
Blanking disc
9.
Hot sensor lead assembly
10. Connector
Solar Loline Collector Installation (Exploded View)
SOLAR COLD PIPE
with NPT 200 Solar Collectors.
11. Compression nut
12. Compression olive
13. Screws
14. Cable tie
15. Label – solar hot pipe
16. Label – solar cold pipe
(Supplied separately)
17. Solar collector
31
SOLAR HOT PIPE