Table of Contents
Advertisement
CONNECTION DETAILS
END PLUG ASSEMBLY – SCREWED FITTING
Refer to
installation diagram on page
Seat an 'O' ring (6) into the collector connection.
1.
Place a blanking disc (7) over the seated 'O' ring (6).
2.
3.
Place the end plug (5) into the collector connection and screw in until it seats
firmly against the blanking disc (7), applying medium pressure with a
spanner to tighten.
Solar Collector
DETAIL B – END PLUG ASSEMBLY – SCREWED FITTING
P/No: 33-0171
P/No: 33-0171
O-Ring 25mm ID x 3.2 Thk
Solar Collector
DETAIL C
END PLUG
(LOLINE AND HILINE)
31 for position and
P/No: 33-0606
Blanking Disc
P/No: 063602
Collector M33 End Plug
Cold water
supply
26
Sunstat valve
Detail B
on page 26.
Advertisement
Table of Contents
