Asus PRIME TRX40-PRO Manual page 78

Table of Contents

Advertisement

PCIEX16_1 Bandwidth
[X16 Mode]
[PCIe RAID Mode]
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
PCIEX16_2 Bandwidth
[X8 Mode]
[PCIe RAID Mode]
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
PCIEX16_3 Bandwidth
[X16 Mode]
[PCIe RAID Mode]
Use PCIe RAID Mode when installing the Hyper M.2 x16 card or other M.2 adapter cards.
Installing other devices when using PCIe RAID Mode may cause your PC to fail to boot
up.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
ASM1074 Controller (Back)
[Disabled]
[Enabled]
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
Q-Code LED Function
[Disabled]
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto]
3-16
The PCIe x16_1 slot runs at x16 mode.
The four PCIe x16 slots run at x4+x4+x4+x4 mode, which allows
you to create a RAID array for up to 4 PCIe devices.
The PCIe x16_2 slot runs at x8 mode.
The PCIe x16 slots run at x4+x4 mode, which allows you to
create a RAID array for up to 2 PCIe devices.
The PCIe x16_3 slot runs at x16 mode.
The four PCIe x16 slots run at x4+x4+x4+x4 mode, which allows
you to create a RAID array for up to 4 PCIe devices.
Disables the controller.
Enables the rear USB 3.2 controller.
Disable the Q-Code LED function.
Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.
Chapter 3: BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents