General Precautions - Brother RuggedJet RJ-2030 Product Safety Manual

Rechargeable Li-ion battery
 At the time of purchase, the rechargeable battery is slightly charged so that the operation of your printer
can be verified; however, the rechargeable battery should be fully charged with the AC adapter or
battery charger before your printer is used.
 If your printer will not be used for a long period of time, remove the rechargeable battery from your
printer, and then store it in a location where it is not exposed to static electricity, high humidity, or high
temperatures (temperatures between 59F/15
are recommended). In order to maintain the efficiency and life of the rechargeable battery, charge it at
least every six months.
 If you notice anything unusual about the rechargeable battery the first time it is used, for example
overheating or rust, DO NOT continue to use the battery. Contact Brother customer service.
Warning label
The following warning labels appear on your printer. Make sure you understand the contents of
each warning label and perform operations while observing the precautions that are described. In
addition, be very careful that the warning labels do not peel off and are not scratched.
RJ-2030/2050
ATTENTION: (For USA and Canada)
The Lithium Ion battery you have purchased is recyclable. At the end of its useful life, under
various state and local laws, it is illegal to dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information on how to recycle this battery.

General Precautions


C and 77F/25
RJ-2140/2150

C and humidity between 40% and 60%,
9