Safety Messages - Avaya WLAN 8100 Series Regulatory Information

Country and plug
description
Australia
AS3112-1981 male plug
The WLAN Controller 8100 Series does not have a power switch. When you connect the AC
power cord to a suitable AC power outlet, the switch powers up immediately.
Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet. Ensure that you use the correct power cord for the switch and power supply.

Safety Messages

Warning:
Installation must be performed by qualified service personnel only. Read and follow all
warning notices and instructions marked on the product or included in the documentation.
Danger:
This equipment relies on the building's installation for overcurrent protection. Ensure that a
fuse or circuit breaker no larger than 120 VAC, 15 A U.S. (240 VAC, 16 A International) is
used on the phase conductors.
Caution:
This device is a Class A product. In a domestic environment, this device can cause radio
interference, in which case the user may be required to take appropriate measures.
Avaya WLAN 8100 Regulatory Information - WLAN Controller 8100 Series
Specifications
240 VAC
50 Hz
Single phase
Safety Messages
Typical plug
September 2012 17