Chapter 3: English; Before You Begin; Installing The Unit On A Table Or Shelf - Avaya WLAN 8100 Series Regulatory Information

Chapter 3: English

Before you begin

Ensure the area where you install and use the WLAN Controller 8100 Series meets the
following environmental requirements:
• Ambient temperature between 32° and 106° F (0° and 50° C)
• Relative humidity between 10% and 90% noncondensing
• No nearby heat sources such as hot air vents or direct sunlight
• No nearby sources of severe electromagnetic noise
• No excessive dust
• Adequate power source within six feet; one circuit required for each power supply (see
table, AC and DC power specifications)
• At least 2 inches (5.08 cm) on each side of the switch unit for ventilation
• Adequate space at the front and rear of the switch for access to cables
If you are installing a single on a table or shelf, ensure the surface can support at least 21
pounds (9.5 kilograms).

Installing the unit on a table or shelf

You can install a single WLAN Controller 8100 Series on any flat surface that can safely support
the weight of the switch and attached cables (21 pounds or 9.5 kilograms).
The following figures provide instructions for installing the switch on a table or shelf.
Avaya WLAN 8100 Regulatory Information - WLAN Controller 8100 Series September 2012 13