Before Using For The First Time - Russell Hobbs RHHM16 Owner's Manual

Before Using for the First Time

1. Carefully unpack Mixer.
2. Wash Beaters and Dough Hooks in warm, soapy water. Rinse
well and dry thoroughly.
3. Wipe Mixer with a soft, clean cloth or sponge. Never immerse
the Mixer in water or any other liquid.
HOW TO INSTALL YOUR MIXER ATTACHMENTS
CAUTION: Always unplug Mixer from outlet before installing
or removing attachments. Use either both beaters or both
dough hooks. Do not attempt to use a dough hook with a
beater. This could damage the Mixer.
NOTE: The Left-hand Dough Hook and Beater have a small round
metal washer collar around the top of their stems. The Right-hand
Dough Hook and Beater have a hexagonal collar around the top of
their stems. The attachment with the hex collar is to be inserted
into the matching hole in the bottom of the Mixer. See Figure 1.
1. Unplug Mixer.
2. Choose attachment type. Do not attempt to use a beater
with a dough hook; use same type attachments only.
3. Push attachment stem into Mixer hole and rotate until it locks
into position. See Figure 1. The attachment will fit snugly into
the hole. Repeat for second attachment.
4. After installing attachment(s), gently tug on each attachment to
be sure it is secure.
Hexagonal
Hole Opening
Figure 1
5