Panasonic CF-20 Series Operating Instructions And Reference Manual page 81

Legacy USB Support
Camera Configuration
Camera (Front)
Only for model with camera.
Camera (Rear)
Only for model with rear camera.
Boot Menu
Boot Mode
If the startup from USB devices is not possible, set [Compatible] and retry.
However, setting [Compatible] will require longer time to display the Windows
boot screen than setting [Normal].
UEFI Priorities
The sub-menu appears when this item is selected.
UEFI Priorities
Boot Option #1 - #7
UEFI Boot Device Control
Set whether to enable or disable the startup of each device.
UEFI Boot from Hard Disk
UEFI Boot from LAN
UEFI Boot from USB
To change the boot order
[Boot Option] for [UEFI Boot Device Control] shows the boot device recognized by Firmware (BIOS).
Boot from a device or not can be selected at [UEFI Priorities], device by device.
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Underlined items are the factory presets.
Normal
Compatible
Enter the sub-menu.
Windows Boot Manager
Recovery Partition
Windows Recovery Environment
UEFI: PXE IP4 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
UEFI: PXE IP6 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
UEFI: PXE IP4 Realtek USB Ethernet Controller [Key-
board Base]
UEFI: PXE IP6 Realtek USB Ethernet Controller [Key-
board Base]
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled