Panasonic CF-20 Series Operating Instructions And Reference Manual page 124

Refer to the OPERATING INSTRUCTIONS accompanying computer for information on proper handling of the AC adaptor and
n
AC cord.
3. Set the front corners of the computer in the latches of the port replicator.
Confirm to close all connector covers of computer before connecting. Do not attempt to make connections if there is any object between
the computer and the port replicator. Doing so could damage the computer and the port replicator.
4. Press the computer in the direction of the arrow and set firmly against the port replicator.
Do not allow your hand to get caught between the computer and the port replicator when setting the computer.
n
Do not attempt to move the port replicator while connecting the computer to the port replicator.
n
If the computer malfunctions while the port replicator is attached, disconnect the port replicator and check to see if the computer oper-
n
ates normally. If the computer operates normally, the port replicator may be malfunctioning. Contact Panasonic Technical Support.
N O T E
See Reference Manual of the computer for connecting and setting USB devices, external displays and LAN.
n
If the image of the external display connected to the port replicator has stopped, remove the computer from the port replicator, and then recon-
n
nect it.
C A U T I O N
C A U T I O N
C A U T I O N