Determining The Supported Number Of Drives And Drive Loop Pairs; Verifying Controller, Nvsram, And Esm Firmware Compatibility; Supported Drives And Drive Loop Pairs In - IBM System Storage DCS Series Installation And Migration Manual

With gen2 controllers, hard disk drive and storage enclosure
Table of Contents

Advertisement

Determining the supported number of drives and drive loop pairs

Use the information in this section to determine the hardware requirements before
you migrate storage subsystems or add hard disk drives. Table 1 provides a list of
the supported number of drives and drive loop pairs for each storage subsystem
by machine type and model number. It also specifies storage enclosure license
requirements.
Table 1. Supported drives and drive loop pairs in storage subsystems
Storage subsystem
DCS3700 with Gen2
Controllers
DCS3860 with Gen2
Controllers
Notes:
1. The DCS3700 expansion enclosure is the only supported drive expansion enclosure for
2. The EXP3800 and DCS3700 expansion enclosures are the only supported drive expansion

Verifying controller, NVSRAM, and ESM firmware compatibility

Use the information in this section to verify controller, NVSRAM, and ESM
firmware compatibility before you migrate storage subsystems or add hard disk
drives. For firmware compatibility between the migrating and original hardware,
the controller firmware and NVSRAM of the target migration storage subsystem
must be at the levels that are indicated in Table 2 on page 5.
You can use the DS Storage Manager Client software and the controller firmware
to upgrade the ESM firmware while the storage subsystem receives I/O from the
host server, if you select only one storage enclosure to download the ESM
firmware at a time in the Select Drive Enclosure To Download ESM Firmware
Window.
Note:
1. See the most recent readme file that is included with the storage subsystem
2. See the readme file for any I/O operation requirements. Some controller
3. See the readme file to ensure that the firmware is compatible with the
4. Although you can upgrade the storage subsystem and ESM firmware while it
Table 2 on page 5 lists the supported machine types, model numbers, and the latest
version of released Storage Manager software and controller firmware levels for
4
IBM System Storage DCS Series with Gen2 controllers Hard Disk Drive and Storage Enclosure Installation and Migration
Guide
Machine
type
1818
1
1813
2
the DCS3700 with Gen2 controllers storage subsystem.
enclosure for the DCS3860 storage subsystem.
controller firmware package. To access the most recent readme file, see
"Finding Storage Manager software, controller firmware, and readme files" on
page 57.
firmware upgrade scenarios might require that you first quiesce host I/O
operations.
controller firmware in the storage subsystem that you are upgrading.
processes I/O from the host server, schedule upgrades to occur during time
periods of low I/O between the storage subsystems and host servers.
Model
Maximum
number
drives
90C
180
96C
360
Maximum
Storage
drive
enclosure
loop/channel
license
pairs
requirement
1
None
0
None

Advertisement

Table of Contents
loading

This manual is also suitable for:

System storage dcs3700System storage dcs3860

Table of Contents