Main Functions - Siemens RWD62 Manual

Software Tool
Functions
Controller type

Main functions

Siemens
Building Technologies
Other combinations with third-party units are possible, provided the input and output
specifications match the RWD62.
A software tool for controller application selection and parameter adjustment is avail-
able. It is a user-friendly Windows® 95 (or above) based software tool which provides
you a printout of the controller settings.
The RWD62 is a stand-alone universal controller, which performs both primary and
auxiliary control functions. The respective mode is defined by entering the correspond-
ing configuration and setting parameters via the push buttons on the controller or the
software tool.
The RWD62 controller can be programmed as follows:
One sequence: Y1 or Y2
Two sequence: Y1 and Y2
Y1 and Y2
Y1 and Y2
Y1
Load
Setpoint
Reverse acting sequence
(application no.: 10...19)
Y1
Setpoint
Reverse and direct acting sequences
(application no.: 30...39)
Y1
Setpoint
2 Direct acting sequences
(application no.: 50...59)
RWD62 Universal controller
reverse or direct acting
reverse and direct acting or
reverse and reverse acting or
direct and direct acting
2 Reverse acting sequences
(application no.: 20...29)
Y2
Load
Setpoint
Direct acting sequence
(application no.: 40...49)
Y2
Load
Y2 Y1
Setpoint
Y1
Load
CE2N3342en
Load
3/10
2017-12-05