Installing A Blade Server Drive - Cisco UCS B460 M4 Installation And Service Note

Installing a Blade Server Drive

Figure 7: Removing and Installing a Server Drive
Step 2 Place the hard drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in another
blade server.
Step 3 Install a blank faceplate (N20-BBLKD) to keep dust out of the blade server if the slot will remain empty.
Installing a Blade Server Drive
Procedure
Step 1
Place the hard drive lever into the open position by pushing the release button.
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs
14
Servicing the Blade Server