1A. Setting Up Service; Setting Up Your Phone - Sanyo SCP-2700 User Manual

1A. Setting Up Service

Setting Up Your Phone (page 2)
Activating Your Phone (page 3)
Setting Up YourVoicemail (page 4)
Sprint Account Passwords (page 4)
Getting Help (page 5)

Setting Up Your Phone

1.
Install the battery.
Insert the battery into the opening on the back of
the phone, making sure the connectors align (
and gently press it down (
Replace the battery cover and press it down until
the latch snaps into place (
2 1A. Setting Up Service
),
).
and ).
2.
Press and hold to turn the phone on.
If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
If your phone is not yet activated, see "Activating
Your Phone" on page
3. Make your first call.
Use your keyboard to enter a phone number.
Press .
Note Your phone's battery should have enough charge
for your phone to turn on and find a signal, set up
your voicemail, and make a call. You should fully
charge your battery as soon as possible. See
"Charging the Battery"on page 16 for details.
for more information.
3