Daewoo DTD-29U9WPT Service Manual page 11

4-5. S-CORRECTION ADJUSTMENT
1) Pattern : PAL B/G Crosshatch
2) Press the
3) Choose the "SC" using the ' PR UP' , ' PR DOWN' keys.
4) Adjust each distance of horizontal line to be the same using the
' VOLUME UP' , ' VOLUME DOWN' keys.
4-6. HORIZONTAL CENTER ADJUSTMENT
1) Pattern : PAL B/G Monoscope
2) Press the
3) Choose the "HSH" using the ' PR UP' , ' PR DOWN' keys.
4) Adjust the vertical line of picture to coincide with the mechanical center marks of the CRT
using the ' VOLUME UP' , ' VOLUME DOWN' keys.
4-7. WIDTH ADJUSTMENT
1) Pattern : PAL B/G Monoscope
2) Press the
3) Choose the "EW" using the ' PR UP' , ' PR DOWN' keys.
4) Set each side over scan to be 10% using the ' VOLUME UP' , ' VOLUME DOWN' keys.
4-8. PINCUSHION ADJUSTMENT
1) Pattern : PAL B/G Crosshatch
2) Press the
3) Choose the "PW" using the ' PR UP' , ' PR DOWN' keys.
Adjust parabola width to fit on screen.
4) Choose the "CP" using the ' PR UP' , ' PR DOWN' keys.
Adjust coner parabola to fit on screen.
5) Choose the "TC" using the ' PR UP' , ' PR DOWN' keys.
Adjust trapezium to fit on screen.
key to set the "STANDARD" mode.
key to set the "STANDARD" mode.
key to set the "STANDARD" mode.
key to set the "STANDARD" mode.
Adjust
- 9 -