Colocación Del Teclado; Procedure; Requisitos Posteriores - Dell XPS 13 Service Manual

Colocación del teclado
AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
inside your
instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the keyboard with the screw holes on the palm-rest
assembly.
2 Replace the 30 screws (M1.6x1.5) that secure the keyboard to the palm-rest
assembly.
3 Adhere the touchpad cable, the I/O-board cable, and the keyboard-controller
board cable to the keyboard.
4 Slide the keyboard cable and the keyboard-backlight cable into the keyboard-
controller board and close the latches to secure the cables.

Requisitos posteriores

1 Coloque el cable de la placa de
2 Coloque el ventilador.
3 Siga el procedimiento del paso 1 al paso 8 en
4 Coloque la placa de
5 Coloque el disipador de
6 Coloque la batería de celda tipo
7 Coloque los altavoces.
8 Coloque la tarjeta inalámbrica.
9 Coloque la batería.
10 Coloque la cubierta de la
88
computer. After working inside your computer, follow the
After working inside your
E/S.
calor.
base.
computer. For more safety best
E/S.
"Colocación de la placa
botón.
Before working
www.dell.com/
base".