Replacing The Heat Sink; Procedimiento; Requisitos Posteriores - Dell XPS 13 Service Manual

Replacing the heat sink

AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
inside your
instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
PRECAUCIÓN: Incorrect alignment of the heat sink can damage the system
board and processor.
NOTA: If either the system board or the heat sink is replaced, use the
thermal pad/paste provided in the kit to ensure that thermal conductivity is
achieved.

Procedimiento

1 Alinee los orificios para tornillos del disipador de calor con los de la placa base.
2 Coloque los tornillos que fijan el disipador de calor a la placa base en el orden
inverso (tal como se indica en el disipador de calor).

Requisitos posteriores

1 Coloque la batería.
2 Coloque la cubierta de la
computer. After working inside your computer, follow the
After working inside your
base.
Before working
computer. For more safety best
www.dell.com/
41