Troubleshooting - Display Messages - Sundance Spas 880 Series Owner's Manual

880 EXPORT SERIES
15.0

Troubleshooting - Display Messages

There are a number of unique functions designed into your
Sundance hot tub to protect it from damage and/or to aid in
troubleshooting. The indicator light located on the front cabinet
panel of the spa is an early detection system that will notify
you when the spa needs immediate attention. A solid white
light indicates that all operations are normal. A solid red light indicates
that immediate attention is required to clear or fix an error code.
Following is a listing of all the possible messages along with their
meanings. Always insist on genuine Sundance replacement parts.
Error
OH
COOL
FLO
HOT
ICE
PNL
MESSAGE
Overheat Protection (Heater is deactivated, filter/
circulation pump is activated). Water temperature is above
acceptable limits. DO NOT ENTER THE WATER! Remove
hot tub cover to speed cooling. See "Water is too hot"
(page 53). If condition persists, contact your Sundance
Spas dealer or qualified service technician.
If the hot tub water is more than -7°C cooler than the
temperature setpoint, jets pump #1 and heater will
automatically activate to provide freeze protection. The hot
tub will stay in this mode until the water temperature
reaches 15 degrees below the set temperature. No
corrective action is necessary.
Page 50
Logo Light
Red
White
Red
White
White
Red
MEANING
WARNING: RISK OF HYPERTHERMIA (OVER-
!
HEATING) CAUSING SEVERE INJURY, BURNS,
OR WELTS.
Error Logo Light
- - - - Red
SN1 Red
SN3 Red
FLO2 Red
ICE2 Red
BLB Red