Panasonic EP-MA73 Manual page 18

3
Check the power cord and the power plug.
Periodically remove dust, etc. from the power plug.
Failure to do so may result in insulation failure due to
humidity, etc., which may cause fire. (Remove dust
using a dry cloth.）
Do not do anything that may damage the
power cord or power plug. (Do not scratch,
process, use near a heater, excessively bend,
twist, pull, place heavy objects on top, or
bundle the cord or plugs.）
Using with a damaged power cord or plug may
cause electric shock, or ignition or fire due to a
short circuit. Contact the nearest authorized service
center for repairs to the power cord or power plug.
4
Switching on the power supply
❶ ●
Insert the power plug into an electrical outlet. Insert the power plug into an electrical outlet.
● ❷
Turn the lock switch key to the open position. Turn the lock switch key to the open position. Turn the lock switch key to the open position. Turn the lock switch key to the open position.
● ❸
Slide the power switch to the on position. Slide the power switch to the on position. Slide the power switch to the on position. Slide the power switch to the on position.
Always insert the power plug fully into the
socket.
Failure to do so may result in electric shock or fire due
to overheating.
Always use sockets and wiring devices at the
correct rated value.
Use at the specified current. (China: 220 V,
Korea: 220 V, Taiwan: 110 V, Hong Kong: 220 V)
Failure to do so may result in electric shock or fire
due to overheating.
Do not insert or unplug the power plug with
wet hands.
Doing so may cause electric shock.
EP-MA73.indb 19
WARNING
WARNING
Be careful not to trip
over the power cord.
Be sure to push the connector all
the way into the appliance inlet.
❶ ●
lock switch
open
❷ ●
lock lock
▶Continued on the next page
power
off on
❸ ●
19
2015-1-19 10:26:14