Table of Contents
Advertisement
10.
Select the [Advanced] tab in the Properties window. Select [Locally Administered Address] from the [Settings]
list box, and enter the MAC address of team adapter that you have checked to the [Value:] text box, and click
[OK].
Step 7: Setting Dual Disk Configuration
NovaScale/ft Server series secures data by setting dual disk configuration using "Disk Management". Be sure to make
dual disk settings by referring to the procedure.
Setting Dual Disk Configuration by Disk Management
IMPORTANT:
To set dual disk configuration, log on as "Administrator" or a member of the group "Administrators".
Make sure to mirror the volumes not only when installing an operating system but also when creating
partitions.
After upgrading the volume that contains system partition to dynamic disk, set the hard disk for mirroring
to the slot. Do not set the hard disk to the slot before upgrading.
Set the mirroring for the hard disk with the designated target ID. See "Hard Disk Configurations That Can
Be Built On The NovaScale/ft Server series" in the separate volume User Guide for details.
1.
Click [Start], and then [Control Panel]. When the [Control Panel] screen appears, double-click [Administrative
Tools], and then [Computer Management].
2.
Click [Disk Management] under the Storage branch of the tree view menu.
3.
Display the hard disk drive list in the right frame, right-click the hard disk where the system is installed and
click [Convert to Dynamic Disk...].
NovaScale R620-LR / R620-MR Setup Guide
4-22
Advertisement
Table of Contents
Troubleshooting
