Operating the remote control
Operating the remote control
How to call up "Operating info":
■
The display illumination is reduced or switched off,
provided you have made the required setting (see
page 23):
1.1. Press OK.
1.2. Press .
■
If you are in the standard menu (default display):
Press .
From anywhere in the menu:
■
3.1. Press
repeatedly until the standard menu
appears.
3.2. Press .
Standard menu (default display)
In the standard menu you can adjust and check the fol-
lowing settings for the selected heating circuit
following illustration):
■
Set room temperatures
■
Heating circuit selection
A
14°C
B
C
Sa 14.07.2018
D
Fig. 2
Indicates operating program of control unit
A
Current outside temperature
B
Current ambient temperature at the remote control
C
(actual room temperature)
Heating circuit selection
If several heating circuits are installed, select required
heating circuit
E
with / .
Setting the room temperature
For setting the room temperature: See page 17.
12
(cont.)
E
E
HK1
20,5°C
17:35
Call up the standard menu as follows:
(see
The display illumination is reduced or switched off,
■
provided you have made the required setting (see
page 23):
Press OK.
■
From anywhere in the menu:
Press
repeatedly until the standard menu
appears.
OK
?
Information bar
D
Selected heating circuit
E
There is no display if only one heating circuit is
installed.