Clock Functions - IKEA KULINARISK Manual

ENGLISH
6. Set the temperature.
7. Press to confirm.
Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up Indicator
This function decreases the heat-up time.

Clock functions

Clock functions table
Clock function
Minute Minder
Duration
End Time
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking process until the time
ends (3 - 20 minutes).
Do not put food in the oven when
the Fast heat up function
operates.
To activate the function, hold
seconds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance.
Use to activate the function. Press
to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
17
for 3
or
to start.