Table of Contents
Advertisement
Setup & Use
9
Place the remote control receiver where you will see or hear it.
10
Unwrap and fully extend the AC adaptor cord for best reception.
Insert the AC adaptor jack into the remote control receiver socket and
plug into the wall outlet.
Note: To use a 9V alkaline battery as a power source, refer to "Remote
Control Receiver Battery Installation" instructions on page 6.
11
Rotate the remote control receiver power/volume dial to turn the
power on. The power indicator lights. Rotate the power/volume dial to
adjust volume.
Note: AC adaptor is 120 VAC, 60Hz, 5W input; 9 VDC 200mA output; center
positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.
15
Advertisement
Table of Contents
