Renault Radio Connect R&Go Manual page 50

R&GO: GENERAL DESCRIPTION
To remove the telephone holder 72
from your audio system:
– hold your phone while pressing the
button for the retaining clips 73, then
take out your phone;
– turn locking knob 74 on the phone
holder 72 anticlockwise to release
the phone from your vehicle's audio
system;
– disconnect the telephone holder 72
from your vehicle's audio system;
– replace the telephone holder 24
cover by turning it clockwise to close
the USB socket.
GB.46
(6/6)
72
Note: you can use the telephone
holder 72 in two positions:
– vertically, by placing your phone in a
horizontal position and then turning
the holder 72 to an upright position;
– horizontally, by placing your phone
vertically and then turning the sup-
port 72 horizontally.
NB: You can also tilt the telephone
holder to get a better view of the
phone's screen.
Charging using the USB port
Once your telephone's USB socket is
connected to the USB port of the tel-
ephone holder 72, you can charge its
battery during use.