Renault Radio Connect R&Go Manual page 33

CONNECTING, DISCONNECTING A TELEPHONE
Scan devices
Pair device
Sel.device
Manual connection (changing the
phone connected)
To display the phone settings menu,
press button 10 on the audio system
front panel or 16, 21 or 26 on the steer-
ing column control, then select the "Sel.
device" menu. The list of phones al-
ready paired is displayed. Select the
telephone that you wish to connect
from the list. Depending on the audio
system panel, turn and press the 5
knob or select by pressing the 14 but-
tons then confirm by pressing the 25
button or the 20 knob on the steering
column control.
Elodie's phone
Pierre's phone
Marie's phone
A message informs you that the phone
is connected.
Note: if a phone is already connected
when changing phones in the already
paired phone list, the existing connec-
tion is automatically disconnected.
(2/3)
Connection failure
If connection fails, check that:
– your phone is switched on;
– your telephone battery is not flat;
– your phone has been previously
paired with the audio system;
– Bluetooth® is now enabled on your
phone and on the audio system;
– the phone is configured to accept the
audio system's connection request.
Note: using your hands-free phone
system for prolonged periods will dis-
charge your phone's battery more
quickly.
GB.29