Cooking Recommendations; Surface Burner Cooking Recommendations - Thermador PRO-HARMONY PRG30 Care And Use Manual

Canning Tips:
• A flat base pan is preferred to one with a concave,
convex or rippled base.
• When using two canners at the same time, use
staggered burners. Do not block air to the burners. A
flame needs the right amount of air for complete
combustion.
• Use a cover on a canner when bringing the contents to
a boil.
• Once the contents have reached a boil on HI, use the
lowest flame possible to maintain the boil or pressure.
• Canning produces a large amount of steam. Take
precautions to prevent burns.

Surface Burner Cooking Recommendations

Food
BEVERAGES
Cocoa
BREADS
French Toast, Pancakes,
Grilled Sandwiches
BUTTER
Melting
CEREALS
Cornmeal, Grits, Oatmeal
CHOCOLATE
Melting
DESSERTS
Candy
Pudding and Pie Filling Mix
Pudding
* It is recommended that these foods be stirred occasionally.
Start Setting
MED – heat milk
MED – preheat skillet
SIM - to start melting
HI – cover, bring water to a
boil, add cereal
XLO - may be stirred to
hasten melting
SIM to MED – cook
following recipe
SIM to MED SIM - cook
according to package
directions
SIM to MED SIM – bring
milk to a boil

Cooking Recommendations

Suggestions For Using the
Recommendations
Use the chart on page 15 to page 17 as a guide. The
settings you use will vary depending on the pans selected
and the starting temperature of the food.
On the chart, the "Finish Setting" has been separated for
the standard and ExtraLow burners. There may or may not
be a change between the two burner settings.
The ExtraLow setting can be either a cooking or a holding
setting.
Raise or lower the flame setting gradually. Allow time for
the pan and the food to adjust to the new setting.
Finish Setting Standard
Burners
SIM – finish heating
SIM to MED – cook
SIM to MED – finish cooking
according to package
directions
SIM to MED
SIM
SIM
Finish Setting ExtraLow
(XLO) Burners
XLO – keep warm, cover*
Same as for Standard
Burners
Allow 5 to 10 minutes to
melt
Same as for Standard
Burners
XLO – to hold, cover*
XLO – allow 10 to 15
minutes to melt
XLO – to hold*
Same as for Standard
Burners
Same as for Standard
Burners
Same as for Standard
Burners
English 15