Kompernass CR 5 A2 Operating Instructions And Safety Instructions page 94

Time & date
If you access this menu option, you can then use the ▲▼ buttons
whether the recordings are to be made with or without a date stamp . Select "Time &
date stamp on" to activate ths function or "Time & date stamp off" to deactivate it .
To set the current date, call up "Set time & date" . Then use the ▲▼ buttons
the current year . Press the MODE button
hours of the current time . Press the MODE button
to set the minutes . Press the MODE button
seconds . Press the MODE button
date format . The options are „YY/MM/DD" for the two-digit date in the order „year/
month/day", „MM/DD/YY" for the two-digit date in the order „month/day/year"
and „DD/MM/YY" for the two-digit date in the order „day/month/year" . Press
the MODE button
button to use the ▲▼ buttons
Confirm your selection by pressing the
return to the list of menu items .
Auto Power Off
If you access this menu option, you can the use the ▲▼ buttons
whether the device switches off automatically after "1 Min", "3 Min" or "5 Min" of
inactivity . If you select "Off", the device will not switch off automatically .
Confirm your selection by pressing the
return to the list of menu items .
Impact sensor
If you access this menu option, then you can use the ▲▼ buttons
sensitivity of the built-in impact sensor: "Very low", "Low", "Middle", "High" and "Very
high" are the available options . This feature automatically protects the current video re-
cording when it recognises an impact, which indicates an accident event, from being
overwritten during a loop recording . The
the current recording is protected from deletion . Confirm your selection by pressing the
/ button
Beep sound
If you access this menu option, you can then use ▲▼ buttons
the device emits an acoustic signal when pressing the device's buttons as well as the
on/off function ("On"), or not ("Off") . Confirm your selection by pressing the
button . Afterwards, the display will return to the list of menu items .
NOTE
► The countdown and the shutter sound are played for a self-timer capture even if
the sounds are deactivated .
■ 90 │
GB
to use the ▲▼ buttons
to use the ▲▼ buttons
/
. Afterwards, the display will return to the list of menu items .
to use the ▲▼ buttons
to use the ▲▼ buttons
to use the ▲▼ buttons
/
/ to set the day . Press the MODE
to set the month .
/ button . Afterwards, the display will
/ button . Afterwards, the display will
symbol appears on the screen
/ to select
/ to set
/ to set the
/
/ to set the
to set the required
/ to choose
/ to select the
and
/ to select whether
/
CR 5 A2