Cd Or Cd+G Operation - The Singing Machine STVG-700 Owner's Manual

CD OR CD+G OPERATION

PREPARATION
This unit is designed to play CD's bearing the identification logo. If CD's do not
conform to the CD standard, they may not play properly.
Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a
straight motion from the center to the outside of the disc.
Never use chemicals, such as record cleaning sprays, anti-static sprays or fluids,
benzene or thinner to clean compact disc. These chemicals will permanently
damage the plastic surface of the disc.
Always place the compact disc on the disc tray with the label facing upward.
Compact discs can be played on only one side.
To remove a disc from its storage case, press down the center of the case and lift
the disc out, holding it carefully by the edges.
Disc should be returned to their cases after use, protect them from dust and scratches.
To prevent warping the disc, do not expose it to direct sunlight, high humidity or
high temperatures for extended periods of time.
Do not apply paper or write anything on either side of the disc. The inks used in
some felt-tips pens, may damage the surfaces of the disc.
PLAYING CD OR CD+G DISC
Reminders:
Do not press the disc tray of the CD compartment while it's moving.
Never place anything except a compact disc on the disc tray. Foreign objects can
damage the unit.
Do not apply excessive force to disc cover.
Always place one disc to the disc tray at a time.
TURNING POWER ON/OFF
To turn on the Karaoke system, press the POWER switch button. The red LED
POWER indicator will light up. To turn off the system, press POWER switch button
again, the POWER indicator will turn off.
FUNCTION SELECT
Set the FUNCTION-SELECT switch to CDG position, and set the selection (TV
/OFF/RADIO) switch to TV (or OFF) position. Don't set to the RADIO position.
LOADING A DISC
Press the OPEN/CLOSE button to open CD/CDG compartment tray. Close CD/CDG
compartment tray by pressing this key again.
PLAY/PAUSE Mode
To start playing, press PLAY/PAUSE button, the first track [ 1] and the
PLAY/PAUSE LED Indicator will be displayed. (If a CD+G disc is detected, the CDG
Red LED indicator will also on).
To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED
indicator will flash.
STOP Mode
If STOP button is pressed in the course of playing, the disc will cease to play. (The
total track number will be shown on the LED window).
SKIP PLAY (For both CD and CDG discs)
During STOP mode, you can skip up or down to your desired track number by
pressing a SKIP button ( -SKIP- ).
8