Making The Connections - The Singing Machine STVG-700 Owner's Manual

MAKING THE CONNECTIONS

CONNECTING POWER
You can power the system from a standard AC outlet by using supplied powercord.
Caution:
The supplied AC power cord, has a polarized plug that fits into the wall
outlet only one way. If the plug does not fit properly, turn it over and try again.
Do not force it.
CONNECTION TO TV SET
For song lyrics from CDG to appear on the TV screen you must connect the included
video cable (yellow colored RCA single-plug) to the Video Output jack on the back of
your STVG-700 unit. Then connect the other end of the video plug (yellow) to the
Video Input jack of the television. If your television does not have the required
Video Input, you will need an RF Modulator (Radio Frequency Modulator), which
connects through your TV antenna or cable line and serves as Video Input. You must
change your VCR or TV's source selection to Aux In or Video(x) when connecting your
karaoke machine to a Aux In or Video(x) input. Your VCR or TV documentation will
explain how to change the input source selection.
CONNECTING AN AUDIO SOURCE FOR INPUT
To connect another audio source (such as a Tuner, an A/V Receiver or a VCR)
so you can sing along with its music, simply connect the Audio Output jacks
(Red & White TSA jacks) to the system's AUX IN R & L jacks.
ANTENNA CONNECTION
1. ROD ANTENNA (75 OHM)
In a normal reception area, the built-in ROD antenna will deliver a sharp clear picture.
When operation, extend it's length and adjust it's direct & angle for the clearest picture.
2. External antenna adaptor (PAD)
AUX AUX VIDEO VIDEO
IN IN
OUT OUT IN IN
L L
BRIGHT CONTRAST BRIGHT
R R
VIDEO VIDEO
OUT OUT
CONTRAST V-HOLD V-HOLD
TV/AV TV/AV ANT ANT
75 OHM COAXIAL CABLE CONNECTION
7
300 OHM FEEDER CONNECTION