Adjusting Message Texts - Siemens LOGO! 8 Manual

5 Adjustments and expansions
5.3

Adjusting message texts

In the message texts, you can place parameters of individual function blocks to
later display or change them via the display of the LOGO! base module or the
LOGO! TD (alternatively via the web server).
Table 5-2: Adjusting message texts
No.
1.
2.
3.
Time Switch Function
Entry ID: 109745699, V1.0,
Double-click the message text to open the block properties of the function block.
From the list of the blocks interconnected in the program, select the "B002
1.
StandardTime" block, for example.
2. Select the parameter of the block which you want to display and adjust via
the message text. Use drag & drop to move this parameter to the desired
position in the message text (3).
3. Edit the message text by entering, for example, a description of the added
parameter.
Select, via which device the message text is to be displayed. Tick the "Web
4.
server" checkbox, if the message text is also to be displayed via the web
server.
1
4
Confirm your modification with "OK".
04/2017
Action
2
3
34