Advertisement
Quick Links
For use with Hoshizaki Ice Machines: KM-350M_J, KM-520M_J, KM-660M_J,
Check to ensure that all parts are included:
Index
No. Description
1
Front Panel
2
Torx Screw (4 mm-small)
3
Torx Screw (4 mm-large)
4
Torx Screw (5 mm)
5
Torx Pin Bit (small)
6
Torx Pin Bit (large)
• Only qualified service technicians should install this kit to reduce the risk of death, electric shock, serious injury, or fire.
• Move the icemaker control switch to the "OFF" position and turn off the power supply before servicing. Lockout/Tagout to
prevent the power supply from being turned back on inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is
done to the appliance. Make sure that none have fallen into the ice storage bin.
• No installation or service should be undertaken until the technician has thoroughly read these instructions.
Installation Instructions
1) Turn off the power supply. Lockout/Tagout to prevent the power supply from being turned on inadvertently.
2) Remove and discard the front panel and screw(s). See Fig. 1 and Fig. 2.
3) Place the new front panel in its correct position and secure with Torx screw(s) (4 mm-large) provided in this kit.
4) Remove all screws from the sides of the appliance (KM-1301 and KM-1900S_J/3) and replace with Torx screws (4 mm-large)
provided in this kit. See Fig. 2.
Model Shown:
KM-520MAJ
4 mm-large
Fig. 1
Hoshizaki Prison Kit
HS-5245, HS-5246, HS-5252, HS-5253,
HS-5254, HS-5255, HS-5426, HS-5427
KM-901M_J, KM-1301S_J/3, and KM-1900S_J/3
Kit
Number
HS-5426
HS-5427 KM-350MWJ, KM-520MWJ, KM-520MRJ, KM-660MWJ, KM-660MRJ 1A5320G01
HS-5245
HS-5246
HS-5252
HS-5253
HS-5254
HS-5255
All
All
All
All
All
Side
4 mm-large
Model
KM-350MAJ, KM-520MAJ, KM-660MAJ
KM-901MAJ
KM-901MWJ
KM-1301SAJ/3
KM-1301SWJ/3
KM-1900SAJ/3
KM-1900SWJ/3
All
All
All
All
All
WARNING
Model Shown:
KM-1900SAJ3
4 mm-large
1
Part
Number
3B0020G01
2A8612G01
2A8612G02
2A7289G01
2A7251-01
2A7292G01
2A7252-01
7PP2I0812
7PP2-0410
7PP2-0512
7PP2-0001
7PP2-0002
Side
4 mm-large
Fig. 2
2A8478-013
Qty
1
1
1
1
1
1
1
1
20
6
3
1
1
Advertisement
Related Manuals for Hoshizaki HS-5245
Summary of Contents for Hoshizaki HS-5245
-
Page 1: Installation Instructions
Hoshizaki Prison Kit HS-5245, HS-5246, HS-5252, HS-5253, HS-5254, HS-5255, HS-5426, HS-5427 For use with Hoshizaki Ice Machines: KM-350M_J, KM-520M_J, KM-660M_J, KM-901M_J, KM-1301S_J/3, and KM-1900S_J/3 Check to ensure that all parts are included: Index Part No. Description Number Model Number Front Panel... - Page 2 5) Remove all but the drain valve fitting screws from the rear of the appliance and replace with Torx screws (4 mm-small) provided in this kit. See Fig. 3 and Fig. 4. 6) Remove the drain valve fitting screws and replace them with Torx screws (5 mm) provided in this kit. 7) Dispose of any remaining screws.