Table of Contents
Advertisement
Available languages
Available languages
4222.003.3430.1.indd 9
preparing for use
Ergonomic advice
ComfortControl handgrip (specific types only)
-
The unique ComfortControl handgrip is ergonomically designed to
give you sufficient comfort during vacuum cleaning.
-
To gain optimal benefit from this handgrip, it is important that you do
not position your second hand on the tube. When you do so, you twist
and bend your back, which could result in back problems.
attaching the handgrip
Attaching the Comfort Control handgrip (specific types only)
1
Attach the handgrip to the telescopic tube ('click').
2
To disconnect the handgrip from the tube, hold the handgrip with
one hand. With the other hand, hold the telescopic tube and press
the tube release button (1) and pull the tube off the handgrip (2).
Note: This vacuum cleaner has been fitted with holes at the end of the
handgrip. These holes may prevent objects from getting stuck or damaged
when you use your vacuum cleaner without the tube or accessories supplied.
Attaching the standard handgrip (specific types only)
1
To connect the telescopic tube to the handgrip, press the spring-
loaded lock button on the handgrip (1) and insert the handgrip into
the tube (2). Fit the spring-loaded lock button into the opening in the
tube ('click').
2
To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.
EngliSh
9
11-11-09 15:15
Advertisement
Table of Contents
