Crt Type; Display Mode; Cursor Type - Texas Instruments TravelMate 3000 WinSX User Manual

CRT Type

If you have an external monitor connected to your TravelMate 3000 WinSX, set this item
to match your external monitor. This item does not affect your built-in LCD screen. The
possible settings are VGA Color, Multiscan, and VGA Mono (black and white). The
default is VGA Color. The TravelMate 3000 WinSX supports the following types of
external monitors.
q
Multiscanning monitors covering 15.75 to 31.5 kHz, 50 to 70 Hz
q
31 kHz/70 Hz (400/200 line mode), 60 Hz (480 line mode) IBM PS/2
(VGA) monitors
You must select the appropriate monitor device driver tomatch your external monitor and
your application program. Most applications using 640-by-480 resolution do not require a
device driver. Applications requiring super VGA (800 by 600 or 1024 by 768) also
require an appropriate device driver. See your BatteryPro & Productivity Software User's
Manual for more details.

Display Mode

This item selects the display mode for either the built-in LCD screen or a connected
external monitor. Possible setting are VGA Mode, EGA Mode, CGA Mode, MDA Mode,
or, for external monitors only, HGC Mode. Select the setting required by your LCD or
external monitor and/or application program. The default setting is VGA Mode.

Cursor Type

You can change the shape of the cursor to one of the following settings: Underline,
Underbar, or Block. The default setting is Block.
User Features, Page 2
Customizing Your Computer 4-17