Installing The Modules - Texas Instruments TravelMate 3000 WinSX User Manual

Installing the Modules

After removing the keyboard, install the four RAM modules as follows. You do not need
any tools.
Caution:
(ESD). Use a high-impedance, groundedconductive floor mat or wrist strap to
prevent ESD. Before touching the integrated circuit devices, discharge static
electricity from your hands, tools, and containers by touching them to a grounded
surface.
1.
2.
Prevent component damage caused by electrostatic discharge
Remove the RAM modules from their shipping container, one by one, to
prevent bending their pins and possible static damage.
Holding the first module so that the label side faces the left side of the
computer and the beveled corner faces the rear of the computer,
carefully insert the module pins into the 20-pin socket (labeled XU14).
Gently press down on the module to fully insert the pins into their
sockets.
RAM Modules
TravelMate 3000 WinSX Options 6-5