Accessories - Texas Instruments TravelMate 6100 Series User Manual

Accessories

Error
Computer does
not recognize the
media device.
Computer does
not recognize the
accessory.
Error occurs when
using new
Ethernet PC card.
Ethernet card
does not work
while computer is
connected to
DockMate.
In Windows for
Workgroups, Card
Agent utility does
not configure
Ethernet card.
In Windows for
Workgroups
system locks up
after removing
Ethernet card.
In Windows for
Workgroups, Hard
Disk Drive Module
not recognized if
computer is
connected to a
network drive D.
Troubleshooting Tips
Corrective Action
Check the configuration in Device
Manager. Ensure the correct drivers
are installed.
Check the configuration in Device
Manager. Ensure the correct drivers
are installed.
Change memory address to avoid
conflict with video chip. (Refer to the
TravelMate Online Manual .)
Ensure properties of card are
defined correctly. (Refer to the
TravelMate Online Manual .)
1. Turn off computer and insert card.
2. Turn on computer.
3. Configure the card using Network
Setup.
4. Reboot.
Windows for Workgroups is not plug
and play. Turn off computer before
removing Ethernet card.
Disconnect from the network drive
and reboot.
Care and Troubleshooting 8-7