Texas Instruments 900 Series User Manual page 36

Using Indicator Lights
Standby
Mode
Indicator
Power/
Battery-low
Indicator
Caps Lock
Indicator
Num Lock
Indicator
Lights when the computer is in
Standby mode. Off when the computer
is in 5V Suspend mode.
The computer enters Standby mode if
the Standby hot key (Fn+F4) is
pressed or the
parameter in Setup is enabled and
expires.
The computer enters 5V Suspend mode
when you press the 5V Suspend hot
key (FN+F3),
the 5 VOLT SUSPEND
parameter in Setup is
TIMEOUT
enabled and expires, or the display is
closed.
Lights when the computer is on and
there is power to the computer.
Flashes when the battery power is low.
Connect a powered AC adapter to the
computer as soon as possible.
Lights when the caps lock function is
toggled ON using the Caps Lock key.
Lights when the embedded numeric
keypad is toggled ON using the Num
Lock hot key (Fn+F7). Refer to Using
the Internal Numeric Keypad later in
this section for further details.
STANDBY TIMEOUT
2-13