Philips Saeco Intelia HD8752 Cheat Sheet page 2

Cleaning and Maintenance
• Empty/clean internal and external drip tray:
Empty the drip tray each time the 'drip tray full'
indicator pops up through the drip tray cover.
• Empty Coffee ground container.
Always empty the container when the message 'empty coffee
ground container' is displayed. Always perform the activity when the
machine is switched ON.
• Descaling
Descale the machine when the calc clean symbol appears.
Only use the Philips/Saeco decalcifier CA6700.
It takes approx. 35 min. Finish the complete descale process till
the end without interruption.
The complete process consists of 3 cycles; One descaling cycle with the
specific decalcifier and two rinsing cycles with fresh water.
Attach Automatic Milk Frother:
First attach the suction tube and then insert it
onto the steam wand.
If you cannot insert it, rotate the chrome cover.
Detach the Automatic Milk Frother:
Brita/Intenza+ Filter installation/replacement:
. Every time when installing or replacing a filter, this
new filter must be activated in the machine menu.
Activate new filter:
Press the Menu button
pressing the Aroma button until Water Filter ON/OFF is
displayed Select ON and confirm with the Aroma button
Press the ON/OFF button to exit the menu.
Replace new filter:
Press the Menu button
pressing the Aroma button until Water Filter ON/OFF/RESET is
displayed Select RESET and confirm with the Aroma
button Press the ON/OFF button to exit the menu.
Confidential
:
Compact description descaling process
Start descaling:
1.
2.
Descaling cycle:
3.
4.
5.
6.
7.
8.
Rinsing Cycle:
9.
scroll by
10. Empty the drip tray and place it back.
11. Place back the bowl underneath the steam/hot water wand and the dispensing spout.
12. Press the Espresso button to start the rinsing cycle. The display shows the progress.
13. When the Water tank empty symbol appears, refill the water tank with fresh water to
scroll by
14. Press the Espresso button to start the second rinsing cycle.
15. When the descaling process is finished, the display shows END.
16. If the END symbol does not appear, the water tank has not been filled up to the MAX.
Divison, MMMM dd, yyyy, Reference
• Cleaning Automatic Milk Frother
Daily; Rinse it for hygiene and to ensure perfect milk froth.
Weekly: Detach all parts and clean thoroughly.
Monthly: Clean the Automatic Milk Frother with the Saeco Milk
Circuit Cleaner CA6705.
• Brew group cleaning.
Support movies available within the FAQ's; how to lubricate/clean.
Clean the brew group weekly. Take it out and wash it with fresh,
lukewarm water. Clean monthly with the coffee oil remover
tablet CA6704.
Lubricate the brew group once a month or if needed after
cleaning. Use Saeco grease HD5061.
• Cleaning the coffee duct outlet (coffee funnel):
Clean the coffee duct outlet every time you clean
the brew group. Take out the brew group and clean
the coffee duct outlet with a spoon handle.
Remove the Automatic Milk Frother.
Press the Menu button and select CACL CLEAN.
Empty the water tank, remove the filter if placed, and pour the entire bottle of Saeco
descaler in it. Top up with fresh water till the MAX level.
Empty the drip tray and coffee ground container.
Place a bowl underneath the steam/hot water wand and the dispensing spout.
Press the Espresso button to start the descaling cycle.
The machine will start dispensing the descaling solution at intervals. The bar on the
display shows the progress.
When the mixture of descaling solution and water has been used up, the Water tank
empty symbol appears on the display.
Rinse and fill the water tank with fresh water up to the MAX level and place it back.
the MAX level. Place it back.
repeat steps 13 -15 again until END appears.