Pro:centric - LG 32LD650H-ZA Installation Manual

pro:centric

Installation Menu (V2 . 2 1)
LG Hotel Mode Setup
TV Link-Loader
Password Change
Set ID Setup
Clock Setup
Configuration Setup
Power Saving
CEC Setup
External Speaker
Network Setup
Pro:Centric Pro:Centric
OK
1
Use the button to select the Pro:Centric .
(1) Mode
- Sets whether or not enable Pro:Centric and the service method .
- You can set to Off, Flash or GEM using the
all the sub items are disabled .
(2) Medium type
- You can set to IP or RF using the
- If it is set to IP, RF is disabled .
- If it is set to RF, P:C IP Setting is disabled .
(3) rf freq .(Khz)
- Sets the RF frequency at which the Pro:Centric data is received .
- Can be changed in the range of 1~999999 .
(4) Mod . type
- Sets the RF modulation type to DVB-T or DVB-C .
- The default value is DVB-T .
(5) p:c ip setting
- It can be set using the
• (ip a) : Sets the first number in the IPv4 address .
• (ip b) : Sets the second number in the IPv4 address .
• (ip c) : Sets the third number in the IPv4 address .
• (ip d) : Sets the fourth number in the IPv4 address .
• (port) : Sets the actual port number where the Pro:Centric server is running . It can be set using
the or number buttons .
- The default value of ip a/b/c/d is 0 and the range is between 0 and 255 . The default value of port is
80 and the range is between 0 and 65535 .
Pro:Centric
Mode
Medium Type
RF Freq . ( KHz)
Mod . type
P:C IP Setting (IP a)
(IP b)
(IP c)
(IP d)
(Port)
Previous
button . The default value is Off; when it is set to Off,
button .
or number buttons .
Off
◄ ►
IP
------
DVB-T
0
0
0
0
80
OK
25