Send To Usb; Receive From Usb - LG 32LD650H-ZA Installation Manual

instaLLation Menu

Send To USB

"Send To USB" must be done first before "Receive From USB" process, as it generate the file to be
used in
"Send To USB". While writing is in process, the user must not turn TV off nor unplug the USB memory
card. The steps in "Send To USB" are explained below. The following images might be slightly different
than the OSD image .
Plug in USB memory card into the port on target TV .
1
Send To USB
Select the file name and press OK to start
xx-DVB-EU00001 .TLL
Previous
1

Receive From USB

Once the internal TV data and its channel map information is written to the USB memory card, the
user can start "Receive From USB" process with the data file generated and stored in USB memory
card. As previously warned in "Send To USB" process, the user should not turn TV off nor unplug the
USB memory card. Detailed steps for "Receive From USB" are illustrated below. The following images
might be slightly different than the OSD image .
1
Receive from USB
xx-DVB-EU00001 .TLL
Previous
1
Choose a file to be written to
the target TV
2
14
▼
OK
OK
2
Saving xx-DVB-EU00001 .TLL . . . 87%
The process will be shown with prog-
ress bar, and as soon as sending the
current profile is finished, a message
acknowledging the learning process is
complete will pop up .
2
Saving xx-DVB-EU00001 .TLL . . . 87%
The process will be shown with prog-
ress bar, and as soon as teaching the
current profile is finished, a message
acknowledging the teaching process is
complete will pop up .
3
TV turns off automatically after comple-
tion of data sending .