FujiFilm instax SQUARE SQ 6 Users Manual, Trouble Shooting, Safety Precautions page 19

Problems
1 The shooting distance is not
The picture is out of
focus.
2 The lens is not clean.
3 Your camera was shaken when taking
1 Picture was not permitted to develop
The picture is blurred.
2 The picture did not come out smoothly.
The subject in the ● The shooting distance is too close to
viewfinder has shifted
in finished print.
The subject seen ● The view into the viewfinder may have
from the viewfinder
is not included in the
picture.
Possible Causes
appropriate.
the picture.
without touching, pressure being
applied or other interference once it
ejected from the camera.
the subject.
been at an angle when the picture was
taken.
Solutions
1 Select the shooting mode according to the
distance.
2 Clean the lens.
3 Hold your camera firmly and press in the
shutter release button gently. Since the slow
shutter is selected when shooting indoors or
dark outdoors, stabilizing the camera using a
table, tripod, etc. is recommended.
1 Do not press onto or fold the picture.
2 Do not block the film exit with your finger.
● See notes on using Macro Mode.
● Look straight into the viewfinder when taking
a picture.
EN
19