Table of Contents
Advertisement
2102 Wireless Communication Module
Section 2 Introduction
2.4 Technical
Specifications
Table 2-1 Controls, Connectors, and Indicators – 2102 Module
Item No.
Name
Fig. 2-1
1
Communication
Connector
2
Connector Caps
3
Communication
Indicator
4
Latch Release
5
Latch
6
Serial Number Label
7
Communication
Connector
Table 2-2 Technical Specifications – 2102 Module
Size (H×W×D)
Weight
Material
Enclosure (self-certified)
Power
Typical Battery Life (one mod-
ule)
Carrier Detect Cycle Time
Average Connection Time
Operating Temperature
Storage Temperature
2-4
This section lists technical information about the 2102 Module.
• Table 2-2 lists the technical specifications of the 2102.
• Table 2-3 lists the technical specifications of the Spread
Spectrum Radio.
• Table 2-4 lists the technical specifications of the 2191
Battery Module which must be used with the Model
2102.
• Figure 2-2 and Table 2-5 list information about the 2102
Module's communication connector.
Description
Upper communication port. The connection transfers data and 12 VDC power
to other modules. The port may also be used to connect attached modules to
a PC running Flowlink software.
Insert into unused communication connectors to terminate the network and
protect them from moisture damage. When communication connectors are in
use, the caps must be stowed as shown in Figure 2-1 to protect the terminat-
ing components inside the caps.
Illuminates when the module is active.
Push in to release the module from a stack.
Push in to lock the module in a stack.
In back - lists product ID and unit serial numbers.
Lower communication port. The connector transfers data and 12 VDC power
to other modules.
2.9 × 11.3 × 7.5 in.
2.0 lbs
High-impact molded polystyrene
NEMA 4X, 6P
10.2 to 16.6 VDC, 100 mA typical at 12 VDC, 1 mA standby
Typical: 50 days (when using two alkaline batteries)
4 minutes
2 minutes
0° to 140°F
-40° to 140°F
7.4 × 28.7 × 19.1 cm
0.9 kg
IP 68
-18° to 60°C
-40° to 60°C
Advertisement
Table of Contents
